How do you start a Bosch silence plus dishwasher?
John Kim
Published May 13, 2026
.
Keeping this in view, how do I use my Bosch silence plus 50 DBA?
Steps
- Turn on your dishwasher.
- Using the left and right arrows, choose either the Heavy Wash, Normal Wash, Auto Wash, or Half Load cycle.
- Press the Sanitize button.
- From a nearby tap, let the hot water run for 10 seconds.
- Press the Start button.
- Once the cycle is complete, the Sanitized light should be lit up.
Also Know, how do I reset the control panel on my Bosch dishwasher? The most standard way to reset a Bosch dishwasher is simply to press down on the Start button for 3 seconds. The Start button is often labelled with “Reset” as well, or even “Reset 3 Seconds”. For most issues, like a frozen display, this will clear the settings and allow you to begin using the dishwasher again.
Subsequently, one may also ask, why is my Bosch dishwasher not starting?
Cycle Interruption A Bosch dishwasher dues not fill with water if the previous cycle was interrupted. Reset the dishwasher by pressing and holding the "Start" button for at least three seconds. Depending upon the Bosch dishwasher model you have, you also can push the "Cancel-Reset" button to reset the dishwasher.
Why is the red light blinking on my Bosch dishwasher?
Obviously, the flashing red light indicates door not latched. The fix is to reset the door latch or just have it replaced. Dishwasher is 4 years old and this was the first problem.
Related Question AnswersWhat is the best Bosch dishwasher?
Our Top Picks- Best Overall: Bosch Top Control Tall Tub Pocket Handle Dishwasher at Home Depot.
- Best Budget: Bosch Front Control Built-In Dishwasher Tub at Home Depot.
- Best Splurge: Bosch 800 Stainless Steel Tall Tub Dishwasher at Home Depot.
- Best Front-Control: Bosch Ascenta Series Tall Tub in Stainless Steel at Home Depot.
How do I change the settings on my Bosch dishwasher?
How to Adjust Factory Settings on a Bosch Dishwasher- Change the desired language by opening the dishwasher door and pressing the "On/Off" button.
- Adjust or disable the signal tone by pressing and holding the right "Cancel/Reset" button and the "On/Off" button at the same time.
- Change the dishwasher salt setting for use with the water softening system.